LC/GC Certified Vials LC/GC Certified Vials are tested by HPLC using UV detection. The HPLC test was developed to look for trace levels of chemicals used in the manufacturing and packaging process. These chemicals include lubricants, surfactants, antistatic, and antioxidants from packaging. The tests are run on each batch of vials, after they
Bonded Caps for 2ml HPLC Vials. Shell Vials are an economical alternative to screw thread vials for Water’s HPLC autosamplers or any other autosampler that doesn’t use a robotic arm to move the vials. Most shells vials are sold with a polyethylene cap that has a starburst design for easy needle penetration.
Sample Vial with Green Thermoset F217, PTFE-lined Cap, 15mm-425 (1) Sample Vial with Green Thermoset F217, PTFE-lined Cap, 18mm-400 (1) Sample Vial with Screw Cap: 13mm-425 (1)
20ml Vials at EPA storage vials for water analysis Scientific – Lab Supplies, Lab 20ml Vials found inSolid Phase Microextraction (SPME) Specialty Vials and Seals, Glass Liquid Scintillation Vials, Screw neck vials, N 20, Vial,HS,crimp.. new Finneran SPME Vials with a thicker lip are ideal for most SPME appliions.
Case/1000 ™R.A.V. Limited Volume 12x32mm Autosampler Vials, 9-425 Screw Thread In-sert Vial, Amber, 12x32mm w/fused 300ul insert
That is why we offer 3 lines of vials certified for their intended use. 2019-20 Chromatography Columns and Supplies Catalog Receive 10% off ALL the columns and consumables featured in the the catalog today by entering offer code CAT10 at checkout.
Autosampler Vials,Headspace Vials,Chromatography Aijiren focus on autosampler vials with caps,headspace vials since 2001,main lab vials products including storage vials,sampler vials,2ml screw vials and capsect. Aijiren’s 18mm Screw Top Headspace Vial is available in 10ml, 20ml, aer glass and clear glass.
Compatible with all 9 mm screw-thread vials. Molded, 10 ml, solid, pierceable cap. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection.
Hplc Caps at gc vials and caps supplier Scientific. Hplc Caps found inMobile Phase HPLC Cap Systems, 6 mL Crimp Top Vials, Caps and Septa for 1100/1200 Series Autosamplers, HPLC Mobile Phase Cap And.. lets you also connect a syringe for liquid removal. Anti-twist cap design allows the PTFE body to spin freely within the outer cap.
GC Vials 11&20mm Crimper. Hand Crimper is widely used in laboratory Headspace vials crimping caps . The vial crimper is ideal for low volume crimping operations and sample preparation operations. The capping is safe, credible, tight, slick, good sealing.
Thermo Scientific Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
of a screw cap vial with the integrity of a crimp vial, I-D™ vials have write-on patches graduated at 0.5, 1.0 and 1.5 ml. Also compatible with Perkin-Elmer, Shimadzu and Varian GC and LC autosamplers and Waters, Hitachi and Beckman LC autosamplers.
EPA,Storage,VOA Vials -EPA,Storage,VOA Vials Product Center > HPLC Accessories > Autosampler Vials > EPA,Storage,VOA Vials EPA,Storage,VOA Vials Microlab ® have a complete new range of Screw Neck Vials with different volumes ( 8ml , 12ml , 15ml , 20ml and 40ml ) , Microlab ®vials are ideal for sampling or storage or general laboratory use.
lips on vial transparent high-density polyethylene bottle, capacity (20 mL), screw cap, case of 500 ea Vials shrink-wrapped trays Screw caps in a separate sealed tray pricing SDS
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack