Use for LCMS, LCMS/MS, Low abundance & Basic Analytes RSA™ vials & inserts made with Reduced Surface Activity glass (RSA™) were developed for the separations laboratory that investigates low abundance analytes or samples that are pH sensitive, basic in nature or when using mass spectrometers.
Vials and caps Vials Inserts Closures, caps and septa Vial kits and other combinations Vial racks and container Crimping and decapping tools Flash chromatography / LC adsorbents HPLC and UHPLC Thin layer chromatography (TLC) Gas chromatography (GC) Bioanalysis
Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs. 24
The first OOS occurred when a chemist used the caps with non-cut septa on the Shimadzu HPLC. All vials had the first injections with significantly lower areas than the following injections. Prior to this OOS, we allocated the caps with non-cut septa for the Dionex HPLC, and the caps with pre-cut septa for the Shimadzu HPLC.
Vaplock is the solution Designed to minimize leaks, spills, and vapor escape from HPLC solvent waste containers and reagent vessels, Vaplock Closed Systems greatly reduces exposure to harmful chemicals in the laboratory environment. Engineered with ease of use and adaptability in mind, Vaplock will conform to a broad array of lab equipment
Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte. Concentration of analytes is often tied closely with the detection source used.
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vials. Analytics-Shop offers a wide product range of vials, caps and accessories. Whether your needs include chromatography, sample storage, cryo-preservation or scintillation, we have options for you. You can find almost any vial you need for all your laboratory requirements and applications for the right product in our shop.
Sample Vials. Hawach supply standard-certified automatic vials, caps and septa at no additional cost. Ensuring that with vials from Hawach you will achieve consistent, reliable and reproducible results time after time, thereby bringing high quality with the most cost-effective to all of our clients.
The HPLC Poly Manifold enables up to six waste lines (per manifold) from HPLC processes to be fed into a single intake fitting. Manifolds have six 1/4-28 ports and one 3/8″ NPT port (all come with caps for unused ports) and either one quick disconnect in No. 316 stainless steel or
Fisher Scientific offers the vials you need for all of your laboratory requirements and applications. Whether your needs include chromatography, sample storage, cryo-preservation or scintillation, we have options for you.
Glass and Plastic Vials Individuals that have never stepped foot in a laboratory can imagine what it’s like in a lab. Those individuals probably imagine work stations with test tubes and glass vials.
Autosampler Vial, 2ml HPLC Vial, Clear Lab Vial, Sample Vial with Writing Area, 9-425 Screw-Thread Vial, Blue Screw Cap with Hole, White PTFE & Red Silicone Septa 100 Pack by Alberts Filter 4.9 out of 5 stars 25
Maximize your sample performance and have fewer failed assays with the Thermo Scientific Chromacol GOLD Grade Vials. These vials offer the most state-of-the-art technology in the industry for the analysis of critical analytes during low detection limit assays, and when sample quality, reproducibility, security, and integrity are of upmost importance.
USA Home > Product Directory > Analytical/Chromatography > Vials > Vials for HPLC > Certified bonded caps with septa, pkg of 100 9 mm cap, PTFE/red rubber septum …
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack