Thermo Fisher 2 ml vials with caps in amber for liquid Thermo Scientific 9 mm Wide Opening Amber Glass Screw Thread Vials are 2 mL, 12 x 32 mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but
Vials are supplied without caps, or else with caps either packaged separately or ready-fitted to minimise contamination. Sample vial caps can be screw-top, friction-fit or snap closure, and made of polythene, polypropylene, black phenolic or aluminium.
Polypropylene injection vials, 0.3 mL, with caps Polypropylene injection vials, 1.5 mL, with caps Thermo Scientific Nalgene 1000 mL 0.2 µm nylon filter units Polypropylene microcentrifuge screw-cap tubes, 1.5 mL Dry block heater REAGENTS AND 18 MΩ-cm
Consider Thermo Scientific 2 mL SureStop Screw Top Vials with AVCS Caps as a secure alternative to crimp top vials. These specially designed screw top vials create an optimal seal with performance data similar to traditional crimp vials. See this technical note
Autosampler Vials Crimpers and Decappers Autosampler Vials, Caps, and Closures Chromatography and Mass Spectrometry Reagents Chromatography Columns and Cartridges Chromatography Syringes Chromatography Water Gases and Gas Accessories
Thermo Scientific National 2mL Screw Thread Vials with Caps and Septa Amber w/patch, 9mm Wide-opening, Short screw thread, Pink caps, Ivory PTFE/Red rubber septa The convenience of a screw thread and the outer profile of a crimp vial for the broadest autosampler compatibility.
2 mL Standard Opening Vials from Supelco. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening. The thread size on this vial is 8-425. Choice of clear or amber glass. Precleaned or silanized options available
1. S2 cells should be subcultured to a final density of 2 × 106–4 × 106 cells/mL. Do not split cells below a density of 0.5 × 106 cells/mL. For example, 2 mL of cells from a 75-cm2 7flask at a density of 2 × 10 cells/mL should be placed into a new 75-cm2 2.
Professional hplc vial inserts supplier Thermo Fisher IndiaMethanol:dichloromethane (1:1, v/v) 34,35 with a flow rate of 0.2 mL min −1 was pumped as an elution solvent from the HP Home About Products 1-4mL Autosampler Vials for HPLC, UPLC, GC 6-20mL
Thermo Scientific TH-641 ii P This manual is a guide for the use of Thermo Scientific ULTRACRIMP® Tube Sealing System Data herein has been verified and is believed adequate for the intended use of the tool. Because failure to follow the recommendations set
Extensive range of vials and accessories including glass vials, scintillation vials, blood vials, conical vials and more. Fisher Scientific – Scheepsbouwersweg 1b – Postbus 4 – 1120 AA Landsmeer – Tel. 020 487 70 00 – Fax. 020 487 70 70 – benelux.info@thermofisher
Assure safe centrifugation and storage of PCR reagents, restriction enzymes and other biochemical reagents and samples by using Thermo Scientific Nunc Storage Vials with Caps. Available in 0.5mL and 2.0mL sizes with frosted writing area, the vials have excellent chemical resistance with leakproof closure.
† Subject to Thermo Fisher Scientific standard limited warranty. See thermoscientific.com or your sales representative for details. Screw cap micro tubes and caps are not recommended for autoclave. Sterile options available. Not intended to submerge and store 2
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either
2 ml vials with caps in clear for HPLC sampling for sale Aijiren Aijiren hplc vial caps in amber for Aijiren autosampler supplier Thermo Scientific™ 8mm Autosampler Inserts | Fisher
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack