Standard opening screw neck vial caps for lab use

Vials & Well Plates / GC Accessories / Supplies & Accessories

Mininert valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. Models are available for screw-cap and crimp-top vials. The crimp-top valve for 13 mm ID glassware slides into the neck of the vial. Turn the threaded flange to secure a tight fit.

Bottle Cap Sizes and Neck Finishes – Lab Glassware, Lab

For example, a neck size of 28-430 has a diameter of 28 mm and fits a container with a 430 GPI thread finish.

Ready-To-Clean Screw Thread Vials W/PP Cap / PTFE Disc by

2.0 ml, 12 x 32 Opening Screw Thread Vials are made from Type 1 Borosilicate ; Designed to work in a variety of autosamplers requiring narrow neck vials; Ready to Clean Jars are designed for users who prefer to use their own cleaning process; Ready to Clean Jars are fully assembled with polypropylene caps and a friction fit .015″ PTFE disc

Amazon.com: 24-400 cap: Industrial & Scientific

JG Finneran 9A-089 Amber Borosilicate Glass Standard VOA Vial with White Polypropylene Solid Top Closure and PTFE Lined, 24-400mm Cap Size, 40mL Capacity (Pack of 100) Misc. $96.29 $ 96 . 29 ($0.96/PACKAGE)

SKS Bottle & Packaging – Torque Guide

Over-torquing may cause some points on the cap to have more pressure then others, which could result in an improper seal. If the cap is applied with too little torque, the container may leak or the closure could come off too easily.The chart below illustrates the recommended torque to apply or remove closures of a specific size and material.

BioQuip Web Products Catalog

The wide mouth opening (17.4mm) of glass capsule vials makes them highly suitable for general use. Vials are made of standard Borosilicate glass tubing. Black screw caps with Polyseal lining are 24mm.

Routine Autosampler Vials | Thermo Fisher Scientific – US

Thermo Scientific Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.

13-425 Screw Vials-13-425 Screw Vials-Autosampler Vials-HPLC

The Microlab ® 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials can also be used as storage vials. Application • HPLC instruments • LCMS instruments • GC instruments Feature

2mL Standard Opening Vials from Supelco | Sigma-Aldrich

2mL Standard Opening Vials Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening. The thread size on this vial is 8-425. • Choice of clear or amber glass.

GUIDELINES FOR AUTOSAMPLER VIAL SELECTION

For example, 8-425 neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.

Glass Vial Screw Cap at Thomas Scientific

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10

Screw Neck Vial wide opening and cap | Osaka Chemical Co.,Ltd

It is possible to use it in common with the wide neck screw, crimp top and snap vial. Closures for Wide neck (10-425) Screw Vial Each four kinds of septums is built in the black cap (10-425). Cap size：10-425　Center hole : 7mm

The Factory of 1.5ml HPLC Vial and Cap

1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper

Screw Neck Vials at Thomas Scientific – Lab Supplies, Lab

Screw neck vials for storage of liquid samples (8 mL, 12 mL, 16 mL, 24 mL) Normally used in combination with closed top screw caps Sample container available for the 8 and 12 mL screw neck storage vials For vials >= 20mL please also refer to screw neck vials N 24 with their appropriate Related Products: Vial 16 Ml

Lab Vials & Microplates | DWK Life Sciences

Whether your needs center on sample collection, storage or automation, our lab vials & microplates deliver the reliability and robustness your work demands.