Standard opening hplc vial caps for Aijiren autosampler

HPLC Vials – Quzhou Lab Technology Co.,Ltd

high performance liquid chromatography vials,gas chromatography,autosampler vials,peek ferrules,syringe filter-Quzhou Lab Trading Co., Ltd.

Autosampler Vials, Caps, and Closures

Autosampler Vials, Caps, and Closures DWK Life Sciences MicroLiter EZ-Decappers™ Hand Operated Vial Cappers and Decappers MicroLiter EZ-Decappers™ Hand Operated Cappers and Decappers by MicroLiter are easy-to-use tools for crimping and decrimping chromatography vial closures.

2 mL Crimp/Snap Top Vials and Caps | Aijiren

Aijiren 2 mL snap top vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 11 mm snap caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.

Alberts Filter 2ml Autosampler Vial with Writing Area, 9mm

COMPATIBLE – These Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. The vials can be used on all common autosamplers, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc. Vials are suitable for AR0-3910-13, 8010-0014 100/pk, 8010-0175 1000/cs, 60180-509

Vial Trays and Drawers for HPLC Autosamplers | Aijiren

Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a wide variety of applications and sample volumes. Vial drawers are available with various sample position numbers, depending on the required capacity and volume of the vials used.

9mm 2ml Wide Opening Screw Vials

9mm 2ml Wide Opening Screw Vials 9mm screw thread caps, septa, and vials are designed especially for use with Aijiren’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification

Autosampler Vial Inserts

Autosampler Vials, Caps and Closures Thermo Scientific™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.

Autosampler Vial Caps and Closures – fishersci.com

Autosampler Vials, Caps, and Closures DWK Life Sciences MicroLiter EZ-Decappers™ Hand Operated Vial Cappers and Decappers MicroLiter EZ-Decappers™ Hand Operated Cappers and Decappers by MicroLiter are easy-to-use tools for crimping and decrimping chromatography vial closures.

Autosampler Vials for GC and HPLC with Screw Caps PTFE Silica

Screw Autosampler Vials for GC and HPLC is the most used in 2ml Autosampler vials.It is suitable for Aijiren, AB Sciex, Brook, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotary or robotic arm samplers.40% larger than standard narrow opening vial, prevents syringe problems.

Aijiren 1100 Series Standard, Micro and Preparative Autosamplers

Choice of Vials and Caps 37 Transporting the Autosampler 40 2 Optimizing Performance Optimization for Lowest Carry-over 42 Using the Automated Needle Wash 43 Using an Injector Program 44 General Recommendation to Lowest Carry-over 45 Fast Injection Cycle and Low Delay Volume 46 Overlapped Injection Mode 46

Sample Vials and Accessories – Waters Corporation

Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte. Concentration of analytes is often tied closely with the detection source used.

Autosampler Vials from Aijiren

Autosampler Vials from Aijiren. Vial integrity, cleanliness, and consistency are critical for today’s demanding applications. That is why Aijiren vials are designed using the same engineering expertise that is built into Aijiren instruments.

Hplc Vials at Thomas Scientific

Standard opening screw thread vials contain a narrow opening allowing the use of GPI 8-425 closures and septa. This vial is designed to work in a variety of auto samplers requiring narrow neck vials. Available with graduated marking spots and silanized.

Vialsampler LC Injector, 1260 Infinity II Vialsampler | Aijiren

The 1260 Infinity II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

Screw Top Vials, Caps and Kits | Thermo Fisher Scientific – DK

Screw top vials are one of several vial types used in autosamplers for automated sample injection into HPLC, GC, and MS analytical instruments. Vial type, size, dimensions, and shape of choice will depend on autosampler instrument compatibility.