Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Autosampler Vials, Caps, and Closures Thermo Scientific™ Open Top Screw Caps for Sample Storage Vials Thermo Scientific™ 9mm Clear Glass Screw Thread Vials
Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening. The thread size on this vial is 8-425. • Choice of clear or amber glass. • Precleaned or silanized options available. Vials only. Vials with cap and septa. Shell vials with plug. Micro-vials.
Hard and soft snap ring caps N 11 for HPLC Hard snap ring caps (transparent or dark blue) for firm fit and very good sealing, however, somewhat stiffer in handling than the light blue soft snap ring caps. These are especially user-friendly when snapping or removing the caps. Storage vials for powdery samples (snap cap vials N 18 and N 22) as
Wide Opening Screw Vial, 2mL Clear Yes Gray Bonded Clear PTFE/ Clear Silicone, Pre-slit 82030-972 100 Amber Yes Gray 82030-976 100 Convenience Kit, Certified 9mm Wide Opening Screw Vial, 2mL Clear Yes Blue Red PTFE/ 10804-054 100 Amber Yes Blue White Silicone 10804-056 100 Convenience Kit, Certified 9mm Wide Opening Screw Vial, 2mL
Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools.
Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry. LCGC Certified Amber Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk – 186000847C : Waters
Pre-assembled clear glass or amber vials are available in sizes that range from 2 mL to 40 mL. They are available in a variety of cap and septa choices. The caps are offered in phenolic or polypropylene with a choice of silicone or red rubber septa included. Autosampler Vials from Supelco.
Manufacturer of Vial Cap And Septa – HPLC Vials, 2 Ml HPLC Vial, 2 Ml Amber Glass Vials and Gc Vials offered by Nandini Marketing Company, Bengaluru, Karnataka.
Standard opening screw thread vials contain a narrow opening allowing the use of GPI 8-425 closures and septa. This vial is designed to work in a variety of auto samplers requiring narrow neck vials. Available with graduated marking spots and silanized.
Standard screw-thread autosampler vials, 12 × 32 mm volume 2 mL, amber glass vial (standard opening), thread for 8-425 : 2 mL 2 mL : thread for 8-425: 12 mm × 32 mm × 4.6 mm : amber glass vial (standard opening) pkg of 100 ea
Amber Hplc Vials found in: LC Certified Vial Kits, Amber Autosampler HPLC Vials, 2.0mL, Vials Autosampler HPLC 2.0mL, 12x32mm, 11mm Crimp, Autosampler..
Due to the cap design universally usable on almost all autosamplers in GC and HPLC Screw neck vials N 9 are available in broad variety, incl. vials with/without label + scale, in clear or amber glass (silanized versions also available) as well as plastic vials Speciality vials, like those with
Autosampler Vials and Vial Sets Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Amber vials with write-on spot, green screw caps, PTFE/red silicone septa 100/pk 5182-0554 Clear vials, blue screw caps, PTFE/silicone/PTFE septa 100/pk 5182-0555 Clear vials with write-on spot, blue screw caps, PTFE/silicone/PTFE septa 100/pk 5182-0866 Amber vials with write-on spot, green screw caps, PTFE/silicone/PTFE septa100/pk 5182-0556
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack