PTFE septa for non-volatile chemistry

Septum Selection Guide Septa for use with general chromatography vials, liquid injection 2-056 PTFE/Natural Red Rubber PTFE Natural Red Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR.

Pre-slit septa are highly recommended for improving injection to injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum). Pre-slit PTFE / Silicone Septum. In order to pierce easily. Diameter: 8mm to 22mm. Thickness: 1mm, 1.5mm, 3mm.

PTFE Disk Septa A solid disk of 0 .010” thick pure PTFE offers superior chemical inertness against the most aggressive solvents . The thin membrane allows for penetration by most normal gauge metal HPLC needles . PTFE septa are not resealable and should not be used with highly volatile solvents, short cycle times or multiple injection methods .

1 Septa Selection Guide PTFE Recommended for single injection applications Excellent solvent resistance and chemical compatibility Does not reseal upon puncturing Not recommended for long-term sample storage PTFE/Silicone Recommended for multiple injections and sample storage Demonstrates excellent resealing characteristics

These septa often emit specific volatile organic compounds (VOCs) confounding the measurement results of breath samples. In the current paper, 14 different brands of magnetic caps with silicone–polytetrafluoroethylene (PTFE), butyl–PTFE, or butyl rubber septa were tested. The total emission of septa over a 4 h period was also evaluated.

For non-volatile analytes with a volatile diluent, the results depended on the injector used. With the fixed loop injector, the TruView Pre-Slit, Lectrabond pre-split and Lectrabond Solid septa gave better resealibility across the multiple injections and longer time periods.

the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.

Our precleaned, Type 1 borosilicate clear or amber glass vials are washed in non-phosphate detergent, rinsed three times with tap water, and rinsed with ASTM Type-1 organic-free water to remove detergent. Post cleaning, vials are assembled with PTFE/silicone septa and open-top polypropylene caps.

Accessory Product Data Sheet Septum Selection Guide 411 Madrid Avenue Torrance, CA 90501 Tel: 310-212-0555 Fax: 310-328-7768 www.phenomenex.com

Mar 31, 2022 · PTFE disk septa. A solid disk 0.010″ thick, our PTFE stands better than the most aggressive solvents. At least when it comes to chemical inertness. Most standard gauge metal HPLC needles can penetrate the thin membrane. Do not use PTFE septa with the following because you can’t release PTFE septa: 1. volatile solvents, 2. fast cycle periods,

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance. PTFE provides increased chemical resistance.

The C&G 40 mL precleaned VOA (volatile organic compound) vial is mainly used in research laboratories or in chemical industries. It is suitable for use with autosamplers, solid cap and liners for analysis. This L3 vial comes with a 24-414 white PTFE septa cap which offers tight sealing of sample. Compare this item.

Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a . transparent volatile organic analysis vials PTFE silicone . VOA Vials are most commonly used for Volatile Organic Compound

PTFE/Silicone septa: (T/S) -60 +200 -76 +392 PTFE/Silicone/PTFE septa: (T/S/T)* -60 +200 -76 +392 PTFE septa* -200 +250 -328 +482 Butyl/Chlorobutyl/Bromobutyl stopper or septa -20 +125 -4 +257 Gray PTFE/Red rubber -40 +120 -40 +248 PTFE/White silicone purepack septa -60 +200 -76 +392 Gray PTFE/Molded black butyl (pharmafix) septa -20 +125 -4 +257

Rubber septa. Used primarily for routine analysis in gas chromatography. Offers moderate ability to reseal and good chemical inertness. Not recommended for multiple injections or holding samples for further analysis. PTFE is protective layer that once broken exposes rubber to chemical attack.