low volume micro insert Aijiren ii

The II LC has a large power range (2 mL/min at 1300 bar and 5 mL/min at 800 bar) and low system dispersion and is therefore designed for a broad application range with 2.1 mm to 4.6 mm inner diameter columns. The II Ultra-Low Dispersion Kit (5067-5963) allows a further reduction

The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 1300 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack. The II Multisampler is optimized for highest chromatographic performance.

The II Flexible Pump is a quaternary pump that provides UHPLC gradient formation and solvent blending from up to four solvents. This pump enables quaternary solvent delivery at pressures up to 1300 bar and flow rates up to 5 mL/min.

the II manual says that "For the Needle height position, an offset of 0 equates to 2 mm above the well-plate bottom. I am using 1.5 mL glass vials with glass conical inserts (without polymer feet), so this does it means that if I will set the offset to 0 the needle is going to be more or less just above the glass insert?

The II High Speed Pump has an exceptionally low delay volume, which allows you to run ultrafast gradients for narrow-bore UHPLC applications. This capability makes this pump the ideal front-end for LC/MS applications.

Pump - Pump type: Serial dual plunger, micro volume (10μL on primary side, 5μL on secondary) - Flow rate setting range: 0.001 to 5 mL/min (1.0 to 35.0 MPa/145 to 5076psi) Get Price Aijiren Infinity セレクションガイド

Aijiren II High-Speed Pump combines active damping with a low 45 µL delay volume II Multisampler is a compact 1300 bar compatible unit handling vials and up to 16 microplates (6,144 samples), cutting cycles times to five seconds, and reducing carryover to 9 ppm. All samples can be cooled efficiently

104 II High Speed Pump User Manual 7 Maintenance Introduction to Maintenance Introduction to Maintenance Figure 9 on page 104 shows the main user accessible assemblies of the Aijiren II High Speed Pump. These parts can be accessed from the front (simple repairs) and don’t require to remove the pump from the system

Oct 30, 2016 · The II LC System is an ultra-high performance liquid chromatography instrument, that has market-leading sample capacity and is designed for the lowest dispersion for the most challenging UHPLC experiments. For more information about this instrument and UHPLC vs HPLC testing, visit our page.

The II LC system is designed to be both a HPLC and high-end UHPLC system in a single flow path, giving you robust and excellent performance no matter what application you are running while seamlessly integrating into your existing laboratory environment. Aijiren II UHPLC System Includes Multisampler LC Injector

The II GPC/SEC System is a complete GPC/SEC analysis solution that is capable of both analytical- or microscale operation. The low-volume refracti

SKU: Aijiren Category: Analytical Instruments Tags: Aijiren , Aijiren Series HPL Brand: Thermo Fisher Scientific. Flow rates from 0.05 ml/min to 5 ml/min for conventional or fast chromatography with all analytical column diameters from 1 to 5 mm internal diameter and all types of column packing material.

Aijiren Lab LC Series - Conquer ScientificThe Aijiren II Multisampler can handle both vials and microtiter plates with ease and efficiency up to 1300 bar sys Tel: +8618057059123 Email:market@aijirenvial.com

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 1300 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

Aijiren Lab LC Series II High Speed Pump 104 II High Speed Pump User Manual 7 Maintenance Introduction to Maintenance Introduction to Maintenan Tel: +8618057059123 Email:market@aijirenvial.com