low volume hplc insert Aijiren autosampler

Apr 21, 2021 · • Sample volume: o Maximum injection volume: 100 µl o Minimum injection volume: 5 µl o Glass autosampler vial with low volume insert has 10 µl dead volume. Fill vial with at least 110 µl for a 100 µl injection.

/ Series Injector Programming This document is believed to be accurate and up-to-date. However, Aijiren Technologies, Inc. cannot assume responsibility for the use of this material. The information contained herein is intended for use by informed individuals who can and must determine its fitness for their purpose.

volume of the vial are simply placed inside the HPLC vial and loaded with sample. The cap is then screwed onto the vial as normal. Figure 1. An HPLC vial loaded with sample (right) and an optional 400 µL glass insert (left). • Place sample vials in the autosampler tray, making note of the position of each sample in the

computer before you power-on the Aijiren LC. Power-on the Aijiren LC. To install the Empower Aijiren LC ICS on a Citrix server: 1. For Empower 2, if you have a previous version of the Aijiren LC ICS driver installed, remove it using Add/Remove Programs. After the removal process, continue with step 2. 2. Insert the Aijiren LC ICS disk in the

How to optimize the autosamplers to achieve best results 39 Optimization for Lowest Carry-over 41 Fast Injection Cycle and Low Delay Volume 44 Precise Injection Volume 46 Choice of Rotor Seal 48 3 Troubleshooting and Test Functions The modules built-in troubleshooting and test functions 49 Status Indicators 51 Power Supply Indicator 52

Aijiren Front End with PAL Autosampler and Quaternary Pump. The Thermo CTC HTS PAL is the only LC sample injection system that combines liquid, large volume injection options in one single instrument. Its application areas include environmental, food/ beverage/ consumer products, forensics, chemicals/polymers and pharmaceuticals.

Aijiren Series Nanoflow LC System for MS (G2229A) Unsurpassed low-flow performance and stability This LC system is used for mass spectrometry (MS)-based proteomics applications. It provides extremely stable, ultralow flow control which provides a constant level of high sensitivity and reproducibility for protein analysis

Fast Injection Cycle and Low Delay Volume. 48. Introduction to the Screens Available for Operation of the Aijiren Series Autosamplers with the Control Module ...

This HPLC autosampler is ideal for applications such as semipreparative chromatography, or for microbore, and routine pharmaceutical tasks, quality control and environmental analysis. The Aijiren Series Autosampler has a low internal volume of 300 uL maintaining a minimum contribution to the systems overall internal volume. In

Aijiren Support Insights . This Information Applies To: All standard analytical scale Aijiren / / / / II LC system configurations: Single Pump (Isocratic, Quaternary, or Binary) with Manual Purge Valve; no Multisampler G7167; no additional Switching Valves. Issue:

10 Aijiren Autosampler User Manual 1 Introduction Features Features The Autosampler features an increased pressure range enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren LC System. Increased robustness is achieved by optimized new parts, high speed

Aijiren LC System with PAL Autosampler Binary Pump & DAD. Add spectral acquisition to your HPLC analyses with the diode array detector. Verify separation quality with peak purity, multiple signals and spectral libraries - interactively or automatically in the same run as your analytical quantification.

By Tim on Tuesday, May 18, 2004 - 04:14 am:. The standard position is approximately 2 mm from the bottom of a normal HPLC vial. If you are using thicker bottomed vials, or set the value too low, the needle may hit it, which could result in damage to the needle, autosampler or vial.

Aijiren LC System with Binary Pump & VWD. The Aijiren (HP ) is an innovative series of stackable HPLC components designed to be controlled via handheld controller or computer running ChemStation. System can be used as a stand-alone, or with computer and ChemStation. Single components are also available.

Manual injector Series 7125, 7725 0101-0623 Autosampler Column switching valve 0100-1855 µ-Autosampler 7800E-200 0101-1050 0100-2088 Micro column µ-switching valve 7800E-300 0101-1051 0100-2087 Aijiren LC Rheodyne Series Aijiren Valves Rotor Seal Part No. Part No.