low volume autosampler vial inserts Aijiren hplc ii

2021/6/8 · Aijiren II LC System - SelectScienceDescription. The II LC is an integrated system for routine HPLC analysis in analytical and QA/QC labs. Based on the Description. The II LC is an integrated system for routine HPLC analysis

Figure 3 shows how these lines are arranged on the Aijiren II Bio-Inert LC, where we’d want to avoid organic solvent in line A or D. Figure 3. Solvent line arrangement on the Aijiren Bio-Inert LC. That wraps up what I wanted to share with

Aijiren II High-Speed Pump combines active damping with a low 45 µL delay volume II Multisampler is a compact 1300 bar compatible unit handling vials and up to 16 microplates (6,144 samples), cutting cycles times to five seconds, and reducing carryover to 9 ppm.

• Aijiren Autosampler with single valve design • Aijiren Thermostatted Column Compartment for temperatures from 10 degrees below ambient up to 80 C and temperature precision of ± 0.15 C; for up to three full-length, 30 cm columns.

100 Pcs Membrane Solutions 2ml HPLC Sample Vials, Autosampler Vials, 9-425 Amber Vials with Write-on Spot, Graduations, 9mm Blue ABS Screw Caps & Septa for GC Sample vials B075K5YNK8 $66.07 $35.49 Color: Amber Vial & Pre-slit Blue PTFE septa Features: LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class.

2021/6/8 · 15/4/2021 · The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack.

Needle assembly, Vialsampler (p/n -87200) Needle assembly, II Vialsampler (p/n -87201) Needle assembly, slotted, for high injection volumes (p/n ) And one of the following needle seats depending on the Vialsampler )

II Degasser User Manual 43 Maintenance 5 Clean the Instrument Clean the Instrument The vacuum degasser case shou ld be kept clean. Cleaning should be done with a soft cloth slightly dampened with water or a solution of water and a mild detergent.

II LC System from Aijiren Technologies. The II LC is an integrated system for routine HPLC analysis in analytical and QA/QC labs. Based on the proven technology of the Lab LC Series, the system's high quality and performance help you achieve maximum return on investment and lowest cost of ownership from day one.

2021/8/7 · 1.0 PURPOSE To lay down the procedure for Operation and Calibration of HPLC system Aijiren, . 2.0 SCOPE This SOP is applicable for Operation and Calibration of HPLC systems Aijiren, equipped with UV / PDA Detector in Quality Control Department, Company Name, Unit, Area Address, City.

10-425 screw top 2ml vials Aijiren ii lc supplier 2 mL Screw Top Vials and Caps Aijiren 2ml HPLC Vial Insert for Sale-Aijiren Hplc Vials Insert for 2 mL standard opening vial, 4.6 mm I.D. volume 0.15 mL, conical clear glass (with bottom spring), O ...

Autosamplers can handle vials, tubes, microtiter plates, and PCR plates. Sample capacities vary, but can reach up to an eight-rack unit that holds 720 samples, and instruments for low- to high-volume applications (0.1 to 5000 µL).

• Prepare sample in autosampler vial with low volume insert and septum cap Running Buffers Open the purge valve on the Aijiren isocratic pump b. Set the maximum flow gradient to 100 ml/min2 c. Set the flow rate to 5 ml/min d. Run at least 25e. ...

HPLC maintenance tutorial - how to replace the needle and seat capillary on the Aijiren standard /B and autosampler.For more information, please

The Aijiren II Vialsampler is an autosampler designed for the reliability and ease-of-use needed for routine pharmaceutical tasks and quality control, as well as for environmental and food analyses. It can house optionally the integrated column compartment for two LC columns with temperature control up to 80 °C, as well as a