low volume 2ml vial insert Aijiren hplc ii

Read independent reviews on Aijiren II Preparative LC System from Aijiren Technologies on SelectScience

Filtration The challenging solution was passed through each individual syringe filter and a 1-mL filtrate was collected in a 2-mL vial for an HPLC run. Ten different filters of each kind of filter were tested. Filtrate measuring on HPLC/UV The maximum absorbance of the latex beads solutions was observed at 272 nm, which Open the catalog to ...

Injection volume is wrong randomly, e.g. 3 vials in a row are fine, then 2 not, the next is fine and then the next 4 wrong again. Same solvent for all samples, few % AcN in water.

The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available. The autosamplers are controlled by the Aijiren Instant Pilot (G4208A) or by

Tubing assembly, i.d. 6 mm, o.d. 9 mm, 1.2 m (to waste) CAN cable, Aijiren module to module, 1 m 8710-2476 HEX-ALLEN-KEY 2.0-MM-A/F G1313-44512 Halftray for 40 x 2 mL vials G1313-44513 Halftray for 15 x 6 mL vials G1329-43200 Adapter air channel II Fraction Collector User Manual

Sample loop SS, 100µl, 0.51mm id, for 7725 injectors Related Items: Aijiren Rotor seal, Tefzel for G1313 Read More

HPLC Vials (2mL, 12x32mm) Vial Inserts; 9mm Vials & Vial Kits. 9mm, 12 x 32mm Screw Vials ... Aijiren 1050 Piston Seal UHMW-PE. Qty/Pkg: EACH ...

Convenience Kit II: 5500-1289: Quick Connect Capillary ST 0.12x150 M4: 5500-1202: Capillary SST 0.12x500mm M4-SL: 5500- : Quick Connect capillary ST 0.25x400mm: 5500-1196: Quick Turn Capillary ST 0.17x280mm: 5067-5963: Low Dispersion Kit II: 5067-5750: Capillary ST 0.17x600 SX/SX: 5065-9906: LC-MS Connection

Aijiren Capillary LC System Manual 101 Parts and Materials 5 Thermostatted Column Compartment Cover Parts Table 35 Thermostatted column compartment cover parts Item Description Part Number 1 Plastic kit, includes base, sides and top G1316-68714 2 Front cover G1316-68724 3 Name plate Aijiren Series 5042-8901

sumukh.ray Problem with autosampler (Aijiren ) Posted at 4:49pm, Feb 01, 2017 Share Hello, Another issue you may want to look into if using insert vials with liquids with high surface tension.

One statement that you made which concerns me is: "For example, if I have 83 µl in my microvolume insert and it is doing 80 µl injections, some of the vials are nearly empty after analysis (that

The Low volume mixer ( 200 μL) (5067-1565) is designed for use with the Aijiren Lab LC Series II Binary LC System in low delay volume mode. This configuration is typically used for 2.1 mm i.d., 1.8 μm particle size columns, where emphasis is put on S/N ratio. Page 63: When To Remove Damper And Mixer

The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns. This system is tailor-made for routine, high-throughput, laboratory-scale purification when milligrams to grams of starting material are available.

Quaternary LC system The new standard in HPLC Introduction The Aijiren LC system consists of modular units that operate with a maximum pressure of 600 bar. The complete Aijiren LC portfolio com-prises isocratic, binary and quaternary LC systems. The pump modules can be com-