Free Sample for 2ml Amber HPLC Autosampler Vials Aijiren is a company that has been engaged in the production of HPLC Autosampler vial for more than ten years, and we are also a supplier, selling our HPLC Autosampler vial at the factory price.
The minimum required volume in the sample vial is vary instrument to instrument and is completely based on the auto sampler, in particular how long needle will insert into the sample vials.
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
Aijiren offers a broad portfolio including microvials and microvolume inserts, as well as polypropylene and deactivated vials for sensitive samples. Aijiren vials are fully compatible and perform seamlessly with a wide range of instruments.
Aijiren premium certified vials, closures, high recovery vials, and vial inserts offer indisutry-leading performance. From the lowest bleed septa material in our caps to the most insert glass vial material, we are continuously refining our offerings by addressing small details that can deliver big productivity gains.
in GC and HPLC (in contrast to screw neck vials N 9 which can be used alternatively) Supplied in PP boxes with 100 vials each Barcoded vials upon request 11.6 x 32 mm vials can be ordered as single components or – along with a closure of your choice – as a Vial Kit in a drawer-like
Description: These convenience kits are compatible with Shimadzu™ Prominence HPLC Systems and Nexera X2 UHPLC/HPLC Systems. ,89523-480PK,89523-484PK,89523-482PK,89523-478PK 20 mm Headspace Vials, Thermo Scientific
Autosampler Vialsin pack of 100 nos. 1.5 ml (Clear and Amber Color) Screw Top Vials with Blue Screw Cap & PTFE Septa (9mm) 2ml /1.8 ml (Clear and Amber Color) Screw Top Vials with Black Screw Cap & PTFE Septa (8mm)
7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren 6850 autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and 7683 autosamplers.
Each of the vials is washed in non-phosphate detergent and rinsed three times with tap water and ASTM Type 1 organic-free water to remove detergent. After being cleaned, the product is assembled with Type 1 borosilicate glass vials, PTFE/silicone septa, and open-top polypropylene caps. The vials are available in either clear or amber glass.
For non-MS applications and sample concentration ≥pg/ml, Waters LC/GC Certified Vials are a good choice. Adsorption would have little effect on reported results due to high analyte concentration and low glass surface area. For LC/MS applications, with sample concentrations in the 10-100’s ng/ml, Waters LCMS Certified Vials are a good choice.
1. Product Introduction. 1)Description. Wide opening 9-425 vials are used for chromatography analysis, it can be used in HPLC/GC Application.
Chromatography Direct would like to use cookies to store information on your computer, to improve our website and your experience. Some of the cookies we use are essential for parts of the site to operate and have already been set.
Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.
These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Shell Vials are an economical alternative to screw thread vials for Water’s HPLC autosamplers or any other autosampler that doesn’t use a robotic arm to move the vials.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack