Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Aijiren A-Line certified 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures are available with septa constructed from either PTFE silicone or natural red rubber.
settings of the Waters Alliance 2690/2695 HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Waters Maximum Recovery Vial Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with
Shaoxing 2 ml vials and caps manufacturer Technologies Co.,Ltd is one of the leading China autosampler vial racks manufacturers and suppliers, welcome to wholesale cheap 2ml vial, 20ml vials, 12×32 vial, glass vials, hplc vial, sterile vials, 9mm ptfe septum, 10ml glass vial, 1.5ml wide opening vial, ptfe silicone septa, chromatography vial
Fit all 2.0 mL, 12 x 32 mm, vial-based autosamplers. Compatible with all 9 mm screw-thread caps. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa.
Step Vials, Storage Vials, Dram Vials, caps and seals Our storage vials, also known as step vials or dram vials offer a great solution for storing solvents for extended periods of time. Our screw thread vials offer enough threads per inch to eliminate evaporaton with a solid top or lined cap.
There’s a Thermo Scientific vial & closure for every HPLC, GC, Autosampler vials & caps for HPLC, LC/MS, GC and GC/MS … Use Thermo Scientific 2 mL SureStop …
Zhejiang Aijiren Technology Inc.: Find professional 1-4ml-autosampler-vials, 6-20ml GC headspace vials, 8-60ml EPA storage vials, HPLC syringe filter, 16mm、25mm test tube for water analysis manufacturers and suppliers in China here.
9-425 Screw Vials – 2ml Hplc Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Amber vial with large writing patch for sample identification and it with ISO 9001 certificated.
VOA vials for water testing 1660P Clear VOA Vials, 40 mL, Septa Clear vials with 2 caps for each vialopen-top caps with 0.125″ septa and closed top caps with PTFE liner More About this Item Level 1 VOA vials meet EPA recommended guidelines for contamination-free sample containers and include a Certifie of Analysis.
Vials, open-top screw cap, 2 mL large opening with closures, unassembled convenience packs volume 2 mL, clear glass vial, thread for 10-425, black polypropylene cap, PTFE/rubber septa, pkg of × 100 ea; find Supelco-29116-U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
We use pre-splitted vials. We already had a problem with an HPLC and its syringe with a non pre-splitted caps. From there, we use pre-splitted caps to ensure no needle problems. As it has already been written here, in UPLC there’s a first needle allowing to puncture the caps and then the needle that aspirate the sample comes out!
Custom DNA Oligos, RNAi & Assays Sample Vial with Screw Cap: 24mm-400 (1) … 2 mL (34) 2.0 mL (13) 2.5 mL (2) 20 Dram (1) 20 mL (36) 20.0 mL (3) 22 mL (3) 22.0 …
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
Feb 05, 2017 · Among the glass vials tested, for the best case (vial A) 1% epimer was observed after one week, and for the worst case (vial B) 29% epimer was observed after one week. For this particular application vial A, the certified Waters vial, had the best performance for maintaining the solution stability among the glass vials tested. 3.2.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack