Your position:
Home » News » lab vials » Common use gc vials with caps for hplc system

Common use gc vials with caps for hplc system

Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
Share With:
Introduction

Autosampler Vials, Caps, Inserts & Accessories – Microsolv

Caps, Low Volume Inserts, Vials, U-2D Micro-sampling System & Vial Accessories for HPLC and GC are found in this category. Every chromatography laboratory has different requirements for sample containers, therefore, we have developed different “Tiers of Performance” to meet your specific needs. From our economical, BASIK™ tier of products, our MicroSolv™ pharmaceutical, grade b

Vials Cap Septa for GC HPLC – HPLC Solvent Inlet Filter

VIAL: 4ml 15 X 45mm Screw Vial,Clear or Glass AmberThese15x45 mm Vialscanh old upto 4ml of sample.They are used by the Waters48-positionautosampler,Aijiren’s (G2880A) auto sampler tray used with the Aijiren 6850, in 7673 and 7683autosamplers. These Vials can also be used in the Perkin-Elmer Auto system GC, Shimadzu AOC-14/1400, LC-10A, and

Vials and caps – Labquip (Ireland)

N8 N9 Vials and caps for GC / HPLC Screw neck vials N 8 Ready assembled screw closures N 8 Small opening, pack of 100 8–425 thread, pack of 100 11.6 x 32 mm 11.6 x 32 mm 70213 / 70213.2 702004 / 702893 702067 70245 702437 702069 1.5 mL 1.5 mL label + scale Red Rubber / FEP colorless Silicone white / PTFE red Silicone white / PTFE blue, slit

Vials & Caps | Glass and Plastic Vials | LC Caps and Septa

Our portfolio consists of GC vials and LC vials, GC caps and LC caps, and GC septa and LC septa. Through our biological line, we offer glass and plastic vials for optimal measurement of samples by liquid scintillation counting. Our glass vials are chemically-inert, making them suitable for use with aggressive reagents and solubilizers.

Carry-Over (Carryover) Contamination in HPLC and LC-MS Systems

“Carry-over”, Carryover, Carry over, HPLC, UHPLC, Injector, Contamination, is a term used to describe a type of sample contamination which causes sample peaks to re-appear in later runs which do not actually contain the sample (e.g. blank runs). The contamination can last for several sequential runs, often decreasing in amount after each injection (which is a key observation when troubleshooting).

hplc vials | Sigma-Aldrich

27261-U ; black polypropylene hole cap, thread for 8-425, PTFE/silicone, Top Hat (septa and closure designed to fit together tightly), for use with 2 mL vial, 4.6 mm opening, pkg of 100 ea

gc ms vials | Sigma-Aldrich

Vials, screw top with black polypropylene hole cap (10-425 thread), large opening, pre-assembled. 6 Product Results

HPLC Waste » Environmental Health & Safety » University of

The hazardous effluent from the HPLC equipment must be collected in closed containers. Labs may purchase purpose-built collection caps/containers for this; an easy solution, however, is to simply drill holes through the cap of any suitable container and route the effluent lines through those ports.

HPLC & GC Caps – Vials – Products

Kinesis is a leading international supplier of chromatography, liquid handling, sample storage and medicinal chemistry consumables and equipment. The ability to work directly with leading manufacturers enables us to offer very competitive pricing while ensuring that you, the customer, never have to compromise on quality, support or service.

Hplc Vials at Thomas Scientific

in GC and HPLC (in contrast to screw neck vials N 9 which can be used alternatively) Supplied in PP boxes with 100 vials each Barcoded vials upon request 11.6 x 32 mm vials can be ordered as single components or – along with a closure of your choice – as a Vial Kit in a drawer-like

Vial & Closures – Crawford Scientific

If you need any help with vial selection our technical experts can help. Chromatography vials are essential. We all use them, but take them for granted and overlook them as being sources of trouble. Check out this 10 minute video guide to troubleshooting the surprisingly common range of problems seen with this most humble of consumables.

Sample Vials : Waters

These rigorous 2-, 3-, and 4-step certification processes provide clean vials for the demands brought on by sensitive chromatography systems. When cleanliness is a must: LC/GC Certified Vials LC/GC Certified vials are tested by LC/UV for residues of chemicals used in processing and packaging vials.

Hplc Vial Caps at Thomas Scientific

11 mm snap ring vials and caps as a fast an conveniently to use combination in HPLC suitable for almost all autosamplers due to its design in the form of a crimp cap Snap ring vials may be crimped with crimp closures N 11 as well Vial Kits contain 100 Vials and 100 closures in a drawer-like

An Aijiren Septum is Not Just a Septum

range of common solvents used in sample preparation. The septum forms a barrier between your sample analyte in the vial and the outside atmosphere. This barrier protects your sample from external contamination while allowing a needle (from a manual or automatic syringe) to enter the vial, and extract the sample for the next stage of separation.

Vial, Closure and Septa Selection Guide | Sigma-Aldrich

Vial, Closure and Septa Selection Guide. Use this as a guide to selecting the products you need. For technical assistance, contact Supelco Technical Service at (800) 359-3041 or e-mail us at techservice@sial.com.

Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:*
Country:
Email:*
Phone:
Inquiry:*