Vials and caps Vials Inserts Closures, caps and septa Vial kits and other combinations Vial racks and container Crimping and decapping tools Flash chromatography / LC adsorbents HPLC and UHPLC Thin layer chromatography (TLC) Gas chromatography (GC) Bioanalysis
Crimp caps squeeze the septum between the vial’s rim and the crimped aluminum cap forming an excellent seal. The crimp cap vial requires the use of a crimping tool to form the cap around the glass vial lip. When you plan to sample only a few vials, a manual crimper suffices. For large numbers of samples, however, the use of
COMPATIBLE – These Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. The vials can be used on all common autosamplers, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc. Vials are suitable for AR0-3910-13, 8010-0014 100/pk, 8010-0175 1000/cs, 60180-509
Jun 22, 2013 · Vial Caps: If you make multiple injections from one vial (or large volume injections) with a tightly sealed vial cap, a vacuum can form inside the vial causing volumetric errors to occur in your samples (resulting in you injecting less sample each time). Leave the caps slightly loose to avoid this problem.
* UltraBond seal, cap & septa form an inseparable unit, so that septa cannot fall out. 1.5mL screw vial kit, including vial, cap and septa, 100/pack Kit part number Vial Vial part number Septa material Cap/Septa part number 220-97331-30 Clear with write on spot 220-97331-25 PTFE/Silicone, ultra-clean 220-97331-27
Hplc Vials And Caps 1.5ml 9-425 HPLC vials are the most common used consumables in chromatography field. With amber and clear glass available for different samples.
1.5ml snap HPLC vials Similarly, an aqueous solution containing 0.1% by volume of ammonia can be used in a variety of high pH compatible columns. When using a low silicon hydroxyl active column, buffers are rarely used, whether running with low or high pH mobile phases, including when using mobile phase A as a diluent to prepare a sample solution.
8 LABSOLUTE® VIALS & CAPS SCREW NECK ND8 SCREW NECK VIALS AND MICRO-VIALS ND8 Screw neck vials and micro-vials ND8 are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials. The micro-vials often require an adapter so that they can be used in the autosampler. Properties • 1st hydrolytic class glass
16ml HPLC vials for autosampler and sample storage. Can be used with 18-400 threaded cap closures. This series of 16ml HPLC vials is designed for use with a variety of autosamplers and storage applications. Used with 18-400 threaded caps and septa, consistent flat bottom.
Qualyvials 1.5 are glass 1.5 ml vials suitable for all common HPLC and GC autosamplers. The septa are coated on one side with PTFE, which ensures chemical stability. They are also available with self-sealing polyethylene caps for sample storage (SS series).
1-4mL Autosampler Vials for HPLC, UPLC, GC 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Common Use 2ml Hplc 9-425 Glass Vial With Closures , Find Complete Details about Common Use 2ml Hplc 9-425 Glass Vial With Closures,Autosampler Glass Vials,Hplc Vial,Gc Vial from Laboratory Bottle Supplier or Manufacturer-Changzhou Orient Source Co., Ltd.
Vial with Snap/Clip Top is constructed of clear glass and includes a polyethylene snap cap. Thermo Scientific™ Nunc™ General Long Term Storage Tubes Contain samples in cost-efficient round-bottom, externally-threaded Thermo Scientific™ Nunc™ General Long Term Storage Tubes.
Analytical Sales and Services (Analytical Sales and Services, Pompton Plains, NJ, USA): amber (99005AM (vial D)) and clear (p/n 99006 M (vial E)), 2 ml capacity. Closures (Aijiren, Santa Clara, CA, USA): 9 mm screw cap, PTFE/RS (p/n 5182-0717) wereused for all HPLC analysis. For pH measurements no caps were utilized. 2.3. Chromatographic conditions
Thermo Scientific Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack