250ul vial inserts hplc Aijiren technologies

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns.

Jul 27, 2018 · Supplier Part Number Mfr'r Name Item Description Model Number UOM Published Price 90001 SEDERE ELSD-90LT for HPLC, 115V SEDEX EA 24000 90901 SEDERE ELSD-90LT for UHPLC, 115V SEDEX EA 24000 020-46602-00 SHIMADZU CORPORATION FIXING SCREW STIRRER PLATE SALD7101/BC71 SALD7101 EA 8 022-60295-31 SHIMADZU CORPORATION 10N COUPLING M6X1.0M THREADS TO EYEBOLT 16MM EZTEST EA 21

Manufacture: Aijiren Technologies. Application: The II manual injector is an HPLC valve for manual injection at pressures up to 600 bar. Short Description: II Manual Injector, is a convenient modular accessory.

Aijiren 2ml screw vials. Stefan Schuette, vice president and general manager of the Liquid Separation Division at Aijiren Technologies, said: "The II LC system is the new core platform for the Lab LC series and represents an important technical update to improve customer efficiency, as shown below.

II Degasser User Manual Aijiren Technologies 7 Identifying Cables Cable Overview 52 Analog Cables 54 Remote Cables 56 CAN/LAN Cables 60 RS-232 Cables 61 USB Cables 62 This chapter provides information on cables used with the Aijiren Lab LC Series modules.

Table 2. Acquisition method for caffeine analysis using the Aijiren II Vialsampler or the Aijiren II Multisampler with 100 µL analytical head and 100 µL loop. Parameter Value Column Aijiren Lab Poroshell 120 EC-C18, 2.1 × 50 mm, 2.7 µm Solvent A) Water B) Acetonitrile Gradient 0.00 minutes – 5% B

Buy Aijiren Glass Inserts 250ul 100pk with Free Delivery available (Terms and Conditions apply) To view pricing in Pounds Sterling(£) visit: www.labunlimited.co.uk X Your basket is empty

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

Multisampler D.06.60 II Multisampler D.06.60 Autosampler D.06.76 B II Vial Sampler D.06.76 Table 1–3: Aijiren LC - Column Compartments Product number Module name Minimum required firmware revision G1316A Thermostatted Column Compartment A.06.10

autosampler vial. Instrument The HPLC was a II bio-inert LC consisting of an Aijiren bio-inert quaternary pump (p/n G5611A). The system also featured an Aijiren bio-inert high-performance autosampler (p/n ) fitted with an Aijiren Series autosampler thermostat (p/n ). The LC included an

The Aijiren Bio-inert Quaternary LC features bio-inertness for all components without exception. Bio-inert High Performance Autosampler Parts Description Part No. Bio-inert 2 position/6 port injection valve 5067-4131 Rotor seal, 3 grooves

Aijiren DAD and MWD User Manual 177 Maintenance 9 Maintenance of Standard, Semi-Micro or Micro Flow Cell 1 Use a 4 mm hex key to unscrew the window assembly [1] and remove the gasket [2] from the cell body. NOTE Carefully take one of the gaskets (#6 back or # 7 front) and insert it into the cell body. Do not mix the gasket #6 and # 7.

The Aijiren HPLC-Chip/MS system is a re-useable microfluidic chip-based technology for high sensitivity nanospray LC/MS. The Aijiren replaced the Aijiren and delivers results faster to save time and money. Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the

Unable to connect Aijiren and II systems to Remote Advisor to Standalone Data Source. Problem: Aijiren and II LC modules no longer have an RS-232 port which was used as a second connection for Remote Advisor Standalone Data Source. An alternate connection is needed. Temporary Solution: